Facebook
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665

Details cleaning tool hanging board T-665

No.T-665
Wall-mounted detailing tool board in iron and PP, 90 × 45 cm, with red hooks and clips for spray guns, brushes and bottles. OEM support by SURAINBOW.
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665
  • Details cleaning tool hanging board T-665

Description

Product Overview

This wall-mounted hanging board turns a bare stretch of bay wall into a working tool station. A black perforated panel sits inside a rigid iron frame, and red hooks and clips push into the grid wherever you want them. Spray guns, brushes, bottles and gauges end up in sight and within arm's reach — which is where the cleaning tools of a busy bay belong.

It suits the businesses that run these tools all day: fixed detailing studios, wash and pre-wash bays, dealer prep areas and ceramic car care rooms. Distributors buy it for the same reason their customers do — a wall of organised tools looks like a professional operation and stays organised after the busiest Saturday.

Importers who already order liquids from car cleaning chemical manufacturers tend to add a board or two to the same consignment, because it finishes the kit list a detailing customer expects to see on the wall when they walk in.

Most bays start with a shelf, a trolley and a bucket of brushes, and finish with tools spread across all three. This board replaces that arrangement with one flat surface: everything hangs, nothing stacks, and there is no back row to dig through when a car is waiting.

Day to day it works as a visual inventory. An empty hook shows at a glance that a brush is still on the car or has not been put back, which matters when several technicians share one bay. The slim panel sits close to the wall, so it takes a narrow bay where a cabinet would eat the walkway.

Black perforated pegboard panel with red hooks

Material & Build

  • Iron frame, PP fittings.
  • The structure that carries the load is iron, so the panel holds its shape across the full width; the hooks, clips and locating parts are moulded in PP, which slides over a gun body or a brush handle without scratching it.
  • A perforated grid, not fixed pegs.
  • Every hook position is a decision you can change.
  • When a new product line arrives or a technician wants a different reach, the layout is rebuilt in minutes with no tools and no extra parts.
  • Matte black panel, red fittings.
  • The dark surface keeps attention on the tools hanging in front of it, and the red hooks give a clear target when someone reaches for one without looking.
  • Frame stand-off.
  • The frame holds the panel slightly off the wall, so hook shanks seat fully and gun barrels do not rub against the plaster behind.
  • No power source.
  • No socket, no cable and no moving parts, so the board can go on any suitable wall, including a wet wash bay or a ceramic coating room, where running power would be a complication.
  • Manageable at fitting.
  • The board is light enough for two people to lift, level and hold while the fixings go in, which keeps installation to a single visit.
  • Hardware, not shelving.
  • Tools hang from mechanical fittings on a steel-backed panel instead of resting on a long shelf, so the board does not sag in the middle and nothing walks off a front edge.

Hook & Clip Layout

The larger hooks are made for spray guns, hung muzzle-down so residue drains away from the air inlet instead of collecting in it. A gun on a hook is also a gun off the bench, which is where most accidental damage happens in a working bay.

The clips take brushes by the handle with the bristles hanging clear of the panel. Wheel brushes, interior brushes and the long brushes used for arches and grilles sit in one run — the cleaning tools for car interiors, wheels and paint that come off the cart most often.

Bottles get their own hooks. Cleaner, dressing, glass cleaner and car wax sit in a row at working height with labels facing out, so a technician can pick the right bottle without reading three of them.

A run of hooks at bench height is also where the bottles for a ceramic coating job belong — panel wipe, the coating bottle itself and applicator blocks — kept off the paint while a panel is being prepared.

A gauge or a small air tool can share the board with the rest. Mount the gauge at eye level and it can be read standing up rather than crouching beside a wheel.

Weight goes low and frequency goes high: heavy spray guns and bottles on the lower hooks, the tools reached for every few minutes at chest and shoulder height, and the once-a-week items along the top rail. Leave one free column of grid — every bay buys something new eventually, and an empty run of holes saves re-planning later.

Mounting & Setup

  1. Pick the wall.
  2. Choose a flat, sound, load-bearing surface and check for pipework or cable runs before drilling.
  3. Keep the board out of the direct line of a pressure washer so the cleaning tools hanging on it stay dry.
  4. Leave room in front.
  5. Spray guns, bottles and brushes stand out from the panel, so plan for a person to stand and reach comfortably without stepping around a trolley.
  6. Set the height.
  7. Fix the top row around shoulder height; that puts the heaviest items at chest level and means nothing has to be lifted above the head during a busy shift.
  8. Match the fixings to the wall.
  9. Masonry, block and stud partitions each need their own anchor type — confirm what comes with your order before you drill.
  10. Level the frame, not just the panel.
  11. Two people make this quick: one holds and levels while the other drives the fixings home.
  12. Load from the bottom up.
  13. Hang the heavy items first — spray guns, bottles of car wax — so you can see how the board sits under load before the top rows fill with light tools.
  14. Re-check after the first week.
  15. Fixings settle into a new wall, and a quick tighten then keeps the board solid for the long run.

Typical Bay Setups

  • Fixed detailing bays. One board per bay keeps each technician's guns, brushes and compounds in their own run of hooks, so a shared workshop does not turn into a shared pile.
  • Wash and pre-wash stations.
  • Foam sprayers, mitts and bottles hang within reach of the pressure washer, and a full cleaning tools for car wash routine runs without a walk back to the bench.
  • Coating rooms.
  • Applicator blocks, suede cloths and bottles stay off the work surface while a panel is flashing — a tidier ceramic car care room is easier to control than a crowded trolley.
  • Dealer prep and handover areas.
  • A board beside the delivery bay holds the last-minute cloths, dressings and glass cleaner the finishing technician needs, so nothing is fetched from the far end of the building.
  • Distributor showrooms.
  • Loaded with the brushes, bottles and car wax you sell, the board shows buyers how a range hangs together — more convincing than a shelf of boxes with the products hidden inside.
  • Training and demonstration walls.
  • Trainees learn where each tool belongs, and an instructor can set the board up for a paint-correction run one week and a ceramic coating session the next without replacing a single part.

Specifications

Product typeWall-mounted detailing tool hanging board
ModelT-665
MaterialIron frame with PP hooks and clips
ColourBlack panel, red fittings
Overall size90 × 45 cm
Panel depth2 cm
Weight3.16 kg
MountingWall-mounted, flat against the wall
Fitting systemPerforated grid with hook-on hooks and clips
Power requirementNone
CertificationGS
BrandSURAINBOW

Ordering & After-Sales

  1. Send the brief.
  2. Quantity, destination market and branding requirements are enough to start.
  3. We work as car cleaning chemical manufacturers and tool suppliers, so a board order and a liquid order can be quoted together and shipped as one consignment.
  4. Sample and approve.
  5. Ask your sales contact about sample availability and what the sample will cover.
  6. Once the board, the hooks and the finish are right, seal the approved piece as the reference for bulk production.
  7. Approve the packaging.
  8. Packaging design, artwork, labels and carton marks are proofed and confirmed before production, so the printed version matches what you sell in your market.
  9. Confirm the order.
  10. Minimum order is 10 pcs, packed 5 pcs per box, and OEM support is available when the board is to carry your own brand.
  11. As car cleaning products manufacturers we handle private-label artwork and packing as part of the normal order flow, and a three-year warranty applies to this model — confirm the terms that apply in your market.
  12. Production and pre-shipment check.
  13. The order is produced against the approved sample and checked before dispatch; tell us at order stage which inspection arrangement you want.
  14. Balance payment, shipment and documents.
  15. Balance, shipping method and the document set are agreed on the order confirmation.
  16. Most of the SURAINBOW range is in stock and fast shipping, so a board-only order does not wait for a production slot.
  17. Certificate copies for the board's certification, the commercial invoice and the packing list are prepared with the shipment — tell us at quotation stage if your market needs anything else.
  18. After-sales and batch traceability.
  19. If a delivery arrives damaged or does not match the approved sample, send the order reference, batch details, photos and a short note on the condition on arrival.
  20. The batch is then checked against its production and inspection records, so the answer is based on the run that was actually shipped.

Scale & Supply Capability

SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.

FAQ

What can hang on this board?

Spray guns, brushes, spray bottles, gauges and small air tools all hang from the hooks and clips, and the perforated grid lets you place each one where you actually reach for it. Keep heavy items on the lower hooks and the cleaning tools for car work you use every few minutes at chest and shoulder height.

Are the spray guns and bottles in the photos included?

No. The board is supplied with its hooks and clips, and the guns, bottles, brushes and bucket in the photographs are there to show how it is used. Tell your sales contact if you need a specific mix of hooks and clips for your kit.

What kind of wall does it need?

The board is happiest on a flat, sound wall that will carry a loaded panel without flexing. Solid masonry — brick, concrete or dense block — is the simplest surface: drill, plug and bolt, and the frame mounts flush to the face. Hollow block and aerated concrete need anchors made for that material, because a plug chosen for dense brick can pull out of a soft block. On plasterboard or timber-stud partitions, fix into the studs wherever the mounting holes line up; where they do not, use a cavity anchor rated for the pull-out load and spread the fixing points across the frame instead of clustering them at one end.

Before drilling, check what sits behind the surface. A pipe and cable detector takes a minute and saves a wall. Tiled bays need a tile bit and a slow start so the glaze does not crack, and it helps to drill on a grout line and seal the hole afterwards in a wash bay where water runs down the plaster. Crumbly or very uneven surfaces should be made good first, or the frame will distort as the bolts are tightened; a slight bow can be packed behind the frame. If you are unsure of the substrate, have the person fitting it confirm the anchor type and the safe working load for the finished board with tools hanging on it — the fixing set supplied with your order should then be matched to your wall, not assumed.

Can the hooks be moved after installation?

Yes. Every hook and clip seats in the perforated grid, so a layout can be rebuilt in minutes without tools. Set the positions before you load the board, and leave one column free for whatever the bay buys next.

Can we order it under our own brand?

OEM support is available on this model, and label and carton marking are agreed on the order. As car cleaning products manufacturers we handle the artwork proof before production, so tell your sales contact what should be branded and send the files with the brief.

How do I keep the board looking right in a wet bay?

Wipe the panel with a damp cloth and dry the iron frame after a shift. Let bottles drain before hanging them, and keep abrasive pads away from the matte black surface so the board stays readable as a tool layout rather than a stained panel.