P-110 is a dermal nano leather coating developed for finished leather that gets used hard — car seats and bolsters, household sofas, work shoes and bags. It goes on as a clear liquid once the leather is clean and dry, and it builds its film at low temperature instead of needing a heat cure.
The cured film sits on the grain as a hard, slick layer. That layer takes the punishment: the abrasion of sliding in and out of a seat, the friction across a sofa arm, the scuffing a shoe collects on a daily commute. The leather underneath keeps its own grain, its own colour and its own hand.
We supply it as part of a car care products range that already covers interior cleaners, applicator sponges, waxes and paint coatings, so a distributor can open an interior-care section without a second supply line behind it.
Because the formula is ours, working with us as an auto detailing chemicals manufacturer goes further than a new label on a stock bottle: pack format, carton, label artwork and the formulation direction itself can all be discussed for an own-brand line.
It ships in a printed colour box. Set packs place the coating next to a matching interior cleaner and an applicator sponge, which is the format most buyers want when they add it to a car care kits range and sell the job as a two-step interior service. The formula can be applied without post-application wiping, simplifying handling and reducing downtime for technicians. Its hydrophobic surface and long protection period are intended to reduce reapplication frequency and support labor efficiency in detailing workflows. For household leather sofas and other furnishings, it acts as a preventive barrier against environmental damage and incidental stains. Its easy-clean surface and resistance to ballpoint pen marks suit environments with frequent use or accidental marking, helping facilities teams reduce maintenance frequency and simplify routine cleaning.
Wipe-clean surface. Ballpoint ink, denim dye and everyday grime sit on the film and come off with a damp cloth instead of being worked out of the grain. No post-application wipe. The coating goes on and stays on; there is no second pass with a towel, which saves a step on every seat, sofa or pair of shoes. Low-temperature cure. No heat lamp, booth or separate cure stage, so the work fits around a normal bay schedule instead of blocking it. One bottle, three end uses. Car seats, sofas and footwear take the same product, which matters to buyers purchasing car detailing chemicals wholesale and working to a compact range rather than a long one. A shorter shelf to stock. One line item covers jobs that would otherwise pull in several automotive care products, freeing shelf space for the fast-moving wash and wax lines. Discreet finish. The film is clear and colour-neutral and leaves a soft sheen rather than a lacquered gloss, so a black, grey or beige interior keeps the look the owner bought. Standard supplies, no proprietary tooling. It works with the interior cleaners, sponges and microfibre cloths in a normal car care supplies order, so there is nothing extra to keep in stock. Built around the way a bay works. Application is a wipe-on step with the sponges and mitts already in professional car care use, so a technician picks it up without a separate training session.
| Car seats and bolsters | Finished automotive leather, cleaned and fully dry before the coat goes on |
| Door cards, armrests and headrests | Same process as the seats, with thin even coats on the curved sections |
| Household sofas and armchairs | Family seating, recliners and leather upholstery in daily use |
| Office and reception seating | Shared chairs where ink, denim dye and hand oils build up fastest |
| Footwear and small leather goods | Shoes, bags and belts that scuff against furniture, kerbs and car interiors |
| High-wear panels | Bolsters, seat backs, arm caps and headrests, where the coating proves itself first |
| Aniline and unfinished leather | Draws different chemistry from finished leather — confirm suitability with our team before coating |
In a detailing bay the leather coating belongs after the interior clean and before hand-over. Seats, bolsters, armrests and console lids are coated once the leather is dry, and the car leaves with an interior that stays cleaner for longer between visits.
The commercial case is simple. Coated leather shrugs off the ink, denim dye and hand oils that would otherwise be extracted at the next visit, and a used car that presents with clean, uncracked seats holds its forecourt value better.
It also suits the way a workshop already runs. The coating follows the same clean-and-dry routine the bay uses for interior work, adds no heat stage and puts no second bottle on the trolley — the sort of fit professional car care teams ask for when a process is already tight.
For a buyer building an interior line, it works better inside a programme than on its own. As an auto detailing chemicals manufacturer we can put the cleaner, the coating, the applicator and the rest of the interior chemicals on one order, so a distributor launches one section instead of negotiating four.
Distributors buying car detailing chemicals wholesale usually place it next to paint coatings and wheel care. It answers a different question — the inside of the car rather than the paint — and it gives an account manager something concrete to offer after a correction job.
Fleets, rental desks and used-car operations get the most from it on seats that see several drivers a week. One coating pass brings the whole interior to the same standard, and the easy-clean surface stands up to the cleaning cycles those vehicles go through. The formulation is designed for compatibility across multiple leather substrates and integrates into existing car care product lines and maintenance systems. Its packaging and application method support bulk distribution and scalable deployment for professional detailing operations, while the color-neutral composition and OEM customization options allow it to adapt to different operational requirements.
In professional detailing services, the coating supports efficient restoration and ongoing protection of high-use leather seats. It also helps simplify cleaning workflows and adds resistance to graffiti and everyday marks, supporting longer-lasting interior leather appearance.
| Category | Automotive care products — interior leather care |
| Product type | Dermal nano coating for finished leather |
| Model | P-110 |
| Net weight | 0.82 kg |
| Cure | Low-temperature cure; the film forms after the coat is applied |
| Surface hardness | HB |
| Protection period | Up to one year per application |
| Shelf life | 3 years |
| Documentation | MSDS |
| Origin | Guangdong, China |




SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.